Disposal depth type graded density cartridge filter. This premium media blanketed, yarn wound cartridge is produced by an exclusive process. The yarn is wound spirally to secure the media blanket in position. This process creates large diamond shaped filter chambers that dramatically improve flow performance and dirt holding capability.
 Special Features
Higher Flow Rates
Lower Differential Pressures
Full Length Media Blanket
Graded Density
Potable Water
Beverages and Food Products
Alcohols, Acids and Alkalis
Plating Solutions
 General Specifications
Nominal Cartridge Diameter : Standard Size 1.1” x 2.5” (I.D x O.D)
Economy and Large Sizes Available
Lengths : Fits competitive housing lengths
Micron Ratings : 0.5, 1, 3, 5, 15, 20, 25, 50, 75, 100 and 350.
Maximum Operating Temperature : 250°F (121°C) depending on material.
Maximum Differential Pressure : 60 psid. It is recommended that cartridges be replaced at 15 to 25 psid for maximum efficiency and economy.
Flow Rate : Dependant on grade and pressure. Average 5 to 15 gpm per 10” long cartridge.
Filter Medium : FDA & NSF Approved. Polypropylene, bleached cotton, rayon, polyester or polypropylene.
Core Material : Polypropylene, tinned steel, 304 or 316 stainless steel. Extended core adapters and metal cartridge spacers are available.
O-rings (Sizes of 222 or 226 are available) : Ethylene, Polypropylene, Viton A, Buna N, silicone
  print this page
© EBD Water® 2006. All Rights Reserved.